Phaser 7500 Printer Service Manual 6-9
Adjustments and Calibrations
LED EEPROM Check
The LED EEPROM tests the EEPROM in the Light Emitting Diode (LED) Print Heads.
Procedure
1. Enter Service Diagnostics (page 4-9).
2. Scroll down the menu and select Adjustments/Calibrations. Press OK.
3. Select LED EEPROM Check and press OK.
4. The printer starts processing with a Starting Test... message appears.
5. When the process is complete, the LED EEPROM Check result screen is
displayed.
•Y result is Pass/ Fail
•M result is Pass/ Fail
• C result is Pass/ Fail
•K result is Pass/ Fail
To Next Page
Loading...
