5-56 Phaser 7500 Printer Service Manual
Print-Quality Troubleshooting
IQ-27 Transfer Blank Areas (Partially Moist Paper)
Ripples in partially moist paper becomes wrinkles in the Transfer section, causing
blank areas to appear.
Cause
• This occurs with paper that has uneven moisture content.
Initial Actions
• Check the paper transfer path.
• Ensure there are no debris on the transfer path.
Troubleshooting Reference
Applicable Parts Example Print
■ Fuser Assy, PL7.1.1
Troubleshooting Procedure
Step Actions and Questions Yes No
1 Replace the paper with freshly
unpacked paper from the RML.
Does the problem go away?
Troubleshooting
complete.
Replace the
Fuser Assembly
(REP 7.1,
page 8-67).
Transfer Blank Areas
To Next Page
Loading...
