Xerox PHASER 7500 - REP 5.7 Dispenser Pipe (Y;M;C;K)

8-54 Phaser 7500 Printer Service Manual
Service Parts Disassembly
REP 5.7 Dispenser Pipe (Y/M/C/K)
PL5.1.18
1. Remove the Front Cover Assembly and the Inner Cover Assembly (REP 19.1,
page 8-207).
2. Remove the Deve Plate Assembly (REP 5.4, page 8-49).
3. Raise the shutter by 90° and push it in, then close the shutter.
4. Turn the Lever counterclockwise and close the shutter.
5. Pull the joint section between the Developer Housing Assembly (Y/M/C/K) and
the Dispenser Pipe (Y/M/C/K) towards you and raise it up.
s7500-463
11
12