Xerox PHASER 7500 - REP 15.3 Regi Clutch

Phaser 7500 Printer Service Manual 8-175
Service Parts Disassembly
REP 15.3 Regi Clutch
PL15.2.4
1. Remove the Regi Transport Assembly (REP 15.2, page 8-174).
2. Disconnect the wiring harness connector on the harness that is connected to
the Regi Clutch, and remove the harness from the Harness Guide.
3. Remove the E-ring that secures the Regi Clutch and remove the Regi Clutch.
s7500-237