Xerox PHASER 7500 - IBT CLN Unit Near End Warning; IBT CLN Unit End Warning

3-308 Phaser 7500 Printer Service Manual
Error Messages and Codes
IBT CLN Unit Near End Warning/ IBT CLN Unit End Warning
The IBT Cleaner needs to be replaced soon.
The IBT Belt Unit must be replaced.
Applicable Chain-Link Codes
• 094-418: IBT CLN Unit Near End Warning
• 094-421: IBT CLN Unit End Warning
Initial Actions
• Power cycle the printer.
• If the problem persists, follow the procedure below.
1. Replace the IBT Belt Cleaner Assembly (REP 6.1, page 8-57).
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
■ IBT Belt Cleaner Assy, PL6.1.4