Xerox PHASER 7500 - Printing Operations and Options

Phaser 7500 Printer Service Manual 1-23
General Information
Clearance and Mounting Surface Specifications
These specifications apply to any printer used as a table-top printer, without a
Lower Tray Assembly or Printer Stand.
1. In order to function properly, the printer must be placed on a flat surface with
the following minimum clearances.
2. Mounting surface flatness must be within the specified range.
13 cm
(5 in.)
60 cm
(23.6 in.)
10 cm
(4 in.)
122 cm
(48.0 in.)
60 cm
(23.6 in.)
10 cm
(4 in.)
7
500
s7500-336
5 mm
(0.2 in.) Max
s7500-404