Xerox PHASER 7500 Service Manual

Phaser 7500 Printer Service Manual 8-211
Service Parts Disassembly
REP 19.2 Top Cover Assembly/ Control Panel
PL19.2.1/ PL19.2.13
Caution
Do not expose the Imaging Unit to light for more than 5 minutes. Cover the
Imaging Unit to avoid damage. Do not touch the surface of the Imaging Unit.
1. Remove the Imaging Unit (Y/M/C/K) (REP 1.2, page 8-10).
2. Remove the Toner Cartridge (Y/M/C/K) (REP 1.1, page 8-9).
3. Remove the Waste Cartridge (REP 1.3, page 8-12).
4. Remove the IBT Belt Cleaner Assembly (REP 6.1, page 8-57).
5. Remove the Front Cover Assembly and the Inner Cover Assembly (REP 19.1,
page 8-207).
6. Remove the Top Rear Cover and the Rear Cover (REP 19.6, page 8-217).
7. Remove the Front Left Cover (REP 19.7, page 8-218).
8. Remove the Exit Cover (REP 19.5, page 8-216).
9. Rotate the Paper Weight upwards.

Xerox PHASER 7500 Specifications

General

Max Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	150, 000 pages
Standard Paper Capacity	550 sheets
Duplex Printing	Optional
Standard Memory	256 MB
Network Connectivity	10/100/1000Base-T Ethernet
Supported Operating Systems	Windows, Mac OS, Linux
Max Paper Capacity	2, 100 sheets
Connectivity	USB 2.0, Ethernet
PDL	PostScript 3, PCL 6, PDF
Print Speed	Up to 35 ppm