Xerox PHASER 7500 - REP 15.2 Registration Transport Assembly

8-174 Phaser 7500 Printer Service Manual
Service Parts Disassembly
REP 15.2 Registration Transport Assembly
PL15.1.8
1. Remove the Top Rear Cover and the Rear Cover (REP 19.6, page 8-217).
2. Remove the Left Rear Cover (REP 19.4, page 8-215).
3. Remove the Tray 1 Feeder Assembly (REP 13.1, page 8-130).
4. Remove the Left Hand Cover Assembly (REP 14.3, page 8-148).
5. Disconnect the wiring harness connector on the harness that is connected to
the Regi Transport Assembly.
6. Remove 2 screws deeply recessed (silver, 8mm) that secure the Regi Transport
Assembly to the printer.
7. Remove the Regi Transport Assembly from the printer.
s7500-236