Phaser 7500 Printer Service Manual 7-5
Cleaning and Maintenance
Be sure to pull the cleaning rod out as far as it can come out. Also push the
cleaning rod in as far as it will go. Do not use excessive force when pulling the
cleaning rod.
4. Pull the Cleaning Rod from the lower right corner of the Imaging Unit slot.
5. Continue to pull the Cleaning Rod until it stops, and move it all the way in and
out two to three times to clean the LED Scanner.
6. Repeat this step for all four Image Units.
7. Close the Imaging Unit Cover.
To Next Page
Loading...
