Alcatel-Lucent OmniAccess 5740 - Page 1022

Quality of Service
Left running head:
Chapter name (automatic)
996
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O CONFIGURE THE TYPE OF CLASS FOR A TRAFFIC CLASS
TO CONFIGURE TRAFFIC CLASS AS A PRIORITY CLASS
EXAMPLE
ALU(config-qos-P1-C1)# priority
T
O CONFIGURE TRAFFIC CLASS AS A NETWORK-CONTROL CLASS
Sets the class priority to network control.
Note: - Network-control class will have the highest priority among all the traffic classes.
- Priority class will have the next priority.
- Default class has the least priority.
E
XAMPLE
ALU(config-qos-P1-C1)# network-control
ALU(config-pmap-P1-C1)# no network-control
Command (in Class Mode) Description
priority This command configures the traffic
class as a priority class.
no priority This command removes the priority
attribute of the traffic-class.
Command (in Class Mode) Description
network-control This command configures the traffic
class as a network control class.
no network-control This command removes the network-
control attribute of the traffic-class.