QoS Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1003
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO CONFIGURE BANDWIDTH FOR A PRIORITY CLASS
This command provides a mechanism for bandwidth sharing of the link.
Note: You cannot mix the absolute bandwidth command with percentage bandwidth
command across sibling classes.
E
XAMPLE
ALU(config-pmap-P1-C1)# priority bandwidth 101
ALU(config-pmap-P1-C1)# no priority
Command (in Class Mode) Description
priority bandwidth {<101-
700000000>|percent <1-100>}
This command is used to set the traffic
class as a priority class and configure
bandwidth for the same.
101-700000000 - the absolute
bandwidth (bps) value.
1-100 - bandwidth in percentage.
no priority This command removes the priority
attribute of the traffic-class and the
configured bandwidth.
To Next Page
Loading...
