Quality of Service
Left running head:
Chapter name (automatic)
1016
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O VIEW THE INTERFACE QUEUEING STATISTICS
EXAMPLE
ALU(config)# show queuing interface GigabitEthernet 3/0
interface GigabitEthernet3/0
service-policy in p1
description p1 is the name of the policy map
class c1
priority
shape committed-rate 90000 committed-burst 6000
police committed-rate 9600 commit-action drop committed-burst 1500 exceed-a
queue-limit 155
random-detect ip-dscp 0 min-thresh 50 max-thresh 150
TO VIEW THE QUEUING STATISTICS
EXAMPLE
ALU(config)# show queuing statistics
interface GigabitEthernet3/0
service-policy in p1
class class-default
Packets dropped 0
Packets dequeued 0
Bytes dequeued 0
class c1
Packets dropped 0
Packets dequeued 0
Bytes dequeued 0
interface GigabitEthernet3/1
service-policy out p1
class class-default
Packets dropped 0
Packets dequeued 0
Bytes dequeued 0
Queue length (Packets) 0
Command (in SUM/CM) Description
show queuing interface
[<interface-name>]
This command shows all the interfaces
to which the QoS service policy is
attached and the name/direction of the
policy.
Command (in SUM/CM) Description
show queuing statistics
[{in|out}|<interface-
name>{in|out}]
This command shows the statistics of all
or specified interfaces and traffic classes
in both in and out, or for the specified
direction.
To Next Page
Loading...
Need help?
General
