Alcatel-Lucent OmniAccess 5740 - Page 1043

QoS Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1017
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
class network-control
Packets dropped 0
Packets dequeued 0
Bytes dequeued 0
Queue length (Packets) 0
class c1
Packets dropped 0
Packets dequeued 0
Bytes dequeued 0
Queue length (Packets) 0
T
O VIEW QOS CONFIGURATION
This command shows all class-maps, policy-maps and interfaces to which a policy
is attached (if any).
E
XAMPLE
ALU# show qos config
class-map c1 match-any
1 match any m1 m2
class-map c2 match-any
1 match any m1
class-map 3 match-any
class-map c5 match-any
3 match any m1
policy-map p1
description p1 is the name of the policy map
class c1
priority
shape committed-rate 90000 committed-burst 6000
police committed-rate 9600 commit-action drop committed-burst 1500
exceed-action drop excess-burst 2000 violate-action transmit
queue-limit 155
random-detect ip-dscp 0 min-thresh 50 max-thresh 150
policy-map p2
class c2
police committed-rate 1000000 commit-action transmit committed-
burst 1600 exceed-action drop excess-burst 2600 violate-action drop
interface GigabitEthernet3/0
service-policy in p1
interface GigabitEthernet3/1
service-policy out p1
Command (in SUM/CM) Description
show qos config This command shows the configuration
related to QoS.