Quality of Service
Left running head:
Chapter name (automatic)
1030
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
Step 10: Configure Data-link Connection Identifier (DLCI) on the interface.
ALU(config-if <interface-name>)# frame-relay
interface-dlci <16-1007>
Example:
ALU(config)#interface Serial1/0:0
ALU(config-if Serial0/0:0)# frame-relay interface-dlci
100
Step 11: Configure bandwidth on a FR interface. See “To Configure Bandwidth on
a FR Interface” (Optional)
Step 12: Configure QoS policy on the FR Interface. See “To Attach a Policy Map
to a FR Interface” (Optional)
For more information on configuring policy map, refer to “QoS
Configuration” in this chapter.
To Next Page
Loading...
