DHCP Server Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1045
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO CONFIGURE A HOST POOL
EXAMPLE
ALU(config-dhcp-pool-p2)# host 1.2.3.66 1122.aabb.55ff
ALU(config-dhcp-pool-p2)# no host 1.2.3.66 1122.aabb.55ff
Command (in DHCP Pool CM) Description
host <ip-address> <mac-
address>
This command is used to statically bind
an IP address with a hardware (MAC)
address.
Note: The IP address should exist
within any of the configured
network pools and should be
configured in a different pool
that does not contain any
network.
no host <ip-address> <mac-
address>
Deletes the manual binding between the
host and IP address specified for it.
To Next Page
Loading...
Need help?
General
