Alcatel-Lucent OmniAccess 5740 - Page 1088

DHCP (Dynamic Host Configuration Protocol) Client
Left running head:
Chapter name (automatic)
1062
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O CONFIGURE DHCP CLIENT OBJECT PARAMETERS
You can define the following parameters for a DHCP client object.
T
O CONFIGURE VENDOR CLASS IDENTIFIER
EXAMPLE
ALU(config-dhcp-client-client1)# vendor-class-identifier
broadband-forum.org
ALU(config-dhcp-client-client1)# no vendor-class-identifier
broadband-forum.org
T
O CONFIGURE CLIENT IDENTIFIER
EXAMPLE
ALU(config–dhcp-client-client1)# client-id client123
ALU(config–dhcp-client-client1)# no clienti-id client123
Command (in DHCP Client Object CM) Description
vendor-class-identifier
<identifier>
This command is used to configure the
vendor class identifier option for a client
object.
This is used by the client to send its
vendor information to the server.
no vendor-class-identifier
<identifier>
This command is used to delete the
vendor class identifier option configured
for a client object.
Command (in DHCP Client Object CM) Description
client-id <identifier> This command is used to configure the
client identifier option for a client object.
no client-id <identifier> This command is used to remove the
client identifier option configured for a
client object.