Alcatel-Lucent OmniAccess 5740 - Page 1117

DNS Client Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1091
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
EXAMPLE
ALU(config)# ip name-server 1.1.1.1 1.1.1.2 1.1.1.3
ALU(config)# ip name-server 1.1.1.1 primary
ALU(config)# ip name-server 1.1.1.2 secondary
ALU(config)# no ip name-server 1.1.1.1
DNS C
LIENT OPTIONAL PARAMETERS
TO CONFIGURE DEFAULT DOMAIN NAME
EXAMPLE
ALU(config)# ip domain-name abc.com
ALU(config)# no ip domain-name
T
O CONFIGURE DOMAIN LIST
EXAMPLE
ALU(config)# ip domain-list test
ALU(config)# no ip domain-list
Command (in CM) Description
ip domain-name <name> This command is used to configure the
default domain name, which is used in
domain lookup.
no ip domain-name [<name>] This command is used to remove the
default domain name.
Command (in CM) Description
ip domain-list <name> This command is used to add domain
names to the domain-list.
These are the domain names, which are
to be appended to the host names while
lookup. By default, the default domain-
name is used. The domain names added
in the list are probed in order.
no ip domain-list [<name>] This command is used to delete an entire
domain list or a specific domain name
from the domain list.