System Configuration and Monitoring
Left running head:
Chapter name (automatic)
103
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
The following command installs a flash image from the user area:
ALU(config)# package install flash user:
Path/Filename : alu_fw-5740-2.2.71.npm
The system will need to reboot after a flash upgrade
Do you want to continue? (y/[n]) : y
Do you want to save config before proceeding ([y]/n) : n
Verifying and Extracting LoL image
==================================
Checking for free space in User area...OK
Extracting LoL image...OK
Verifying and Decompressing flash images
========================================
Verifying and decompressing...OK
LoL Version : 2.2.71
Slot 1 3
Status Done Done
Flash updated successfully in slot 1
Flash updated successfully in slot 3
T
O TAKE A BACKUP OF THE PACKAGE
EXAMPLE
ALU(config)# package backup ftp:
Remote Host : 10.91.2.87
Remote Port [ Enter for default ] :
Path : backup-alu-apps.740.3.0.0.82.0.npm
Username [Enter for none] : user1
Password :
Backing up Applications package... Creating...
Uploading file. This could take a while...Completed.
Command (in CM) Description
package backup
{fpkey:|ftp:|tftp:|user:|vrf
<vrf-name>}
Backs up the default package at a given
destination.
The backup file can be stored in user
area or fpkey. It can also be sent to a
remote location using FTP or TFTP or
through an interface associated with the
specified VRF.
To Next Page
Loading...
