Alcatel-Lucent OmniAccess 5740 Cli Configuration Guide

802.1X Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
231
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
CONFIGURE 802.1X OPTIONAL PARAMETERS ON A L2 INTERFACE
TO ENABLE PERIODIC REAUTHENTICATION
EXAMPLE
ALU(config-if switchport5/0)# dot1x reauthentication
ALU(config-if switchport5/0)# no dot1x reauthentication
T
O CONFIGURE TIME-OUT FOR PERIODIC REAUTHENTICATION
EXAMPLE
ALU(config-if switchport5/0)# dot1x timeout reauth-period 4500
ALU(config-if switchport5/0)# no dot1x timeout reauth-period
Command (in ICM) Description
dot1x reauthentication This command is used to enable periodic
reauthentication of the client.
By default, this is disabled.
no dot1x reauthentication This command is used to disable periodic
reauthentication of the client.
Command (in ICM) Description
dot1x timeout reauth-period
<1-65535>
This command sets the number of
seconds between reauthentication
attempts.
This is valid only if periodic
reauthentication is enabled.
no dot1x timeout reauth-
period [<1-65535>]
This command sets the reauthentication
period to its default.
The default is 3600 seconds.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English