Alcatel-Lucent OmniAccess 5740 Cli Configuration Guide

E1 Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
265
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO CONFIGURE A SERIAL INTERFACE
EXAMPLE
The following example enters into the interface configuration mode with a serial
interface having slot-number 0, port 0 with group 0:
ALU(config-controller E1)# exit
ALU(config)#
ALU(config)#interface Serial 0/0:0
ALU(config-if Serial0/0:0)#
T
O BRING UP AND SHUTDOWN THE INTERFACE
EXAMPLE
ALU(config)#interface Serial 0/0:0
ALU(config-if Serial0/0:0)# shutdown
ALU(config)#interface Serial 0/0:0
ALU(config-if Serial0/0:0)# no shutdown
Note: We support Online Insertion and Removal (OIR) functionality for T1E1 line card.
Command (in CM) Description
interface Serial <slot/
port:channel>
This command is entered in the
Configuration Mode to configure a serial
interface in the specific slot or port of the
E1 card.
Command (in ICM) Description
no shutdown This command is entered in the interface
configuration mode to administratively
bring up the interface.
shutdown This command is entered in the interface
configuration mode to administratively
bring down the interface.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English