Alcatel-Lucent OmniAccess 5740 - Page 441

OAM Configuration on OmniAccess 5740 USG
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
415
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
OAM SHOW COMMANDS
TO VIEW OAM ASSOCIATION INFORMATION
EXAMPLE
ALU(config)# show eth-cfm association 100 detail
---------------------------------------------------------------
Association 100 Information
---------------------------------------------------------------
mdIndex: 100
maIndex: 100
maNameFormat: string maName: asc100
ccmInterval: 1
Remote Mep IDs
RMep Id: 100
RMep Id: 20
RMep Id: 200
T
O VIEW STACK TABLE INFORMATION
EXAMPLE
ALU(config)# show eth-cfm cfm-stack-table
---------------------------------------------------------
Dot1ag Stack Table Information
---------------------------------------------------------
Interface VLAN-id level Dir MdIndex MaIndex MepIndex MacAddress
GigabitEthernet 3/0 0 7 Down 100 100 10 00e0.b1c6.df2a
GigabitEthernet 3/0:1 10 0 Down 1 1 1 00e0.b1c6.df2a
Command (in SUM/CM) Description
show eth-cfm association <0-
65535> detail
This command displays OAM
association information.
Command (in SUM/CM) Description
show eth-cfm stack-table
[interface <name> level <0-7>
direction {Down|Up}]
This command displays stack-table
information.