Alcatel-Lucent OmniAccess 5740 - Page 444

Ethernet OAM (Operations, Administration, and Maintenance)
Left running head:
Chapter name (automatic)
418
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O VIEW MEP INFORMATION
EXAMPLE
ALU(config)# show eth-cfm mep 10 domain 100 association 100
2010 Mar 10 15:07:47: %CLI-3-ETH-OAM-CMI: oam_fs_close: fd : 12 reason : 0
---------------------------------------------------------
MEP Information
---------------------------------------------------------
md_Index: 100
ma_Index: 100
mep_Index: 10
Interface Name: GigabitEthernet 3/0 AdminState: Up Direction: Down
MacAddress: 00e0.b1c6.df2a
CCM Enable: Enabled
CCM/LTM Priority: 0 CcmTx: 72850 CcmSequenceErr: 30
AlarmSet Time: 250 AlarmReset Time: 250
LowestPrior Defect: DefMACstatus DefRemoteCCM DefErrorCCM DefXconCCM
HighestDefect: DefNone
Defect Flags: DefNone
AIS-Enable: Disabled
AIS Priority: 1 AIS Interval: 1 AIS Level: 0
TO VIEW REMOTE MEP INFORMATION
EXAMPLE
ALU(config)# show eth-cfm mep 10 domain 100 association 100 all-remote-meps
---------------------------------------------------------------
Eth-CFM Remote-Mep Table
---------------------------------------------------------------
R-mepId Rx-CC Rx-Rdi Port-Tlv If-Tlv Peer Mac Addr CCM status since
---------------------------------------------------------------
100 False True Absent Absent 0E0.B1B2.539C Fri Jan 2 02:31:49 1970
20 False True Absent Absent 0E0.B1C6.3CBC Fri Jan 2 02:31:49 1970
200 False True Absent Absent 011.8B 2.7911 Fri Jan 2 02:31:49 1970
---------------------------------------------------------------
Command (in SUM/CM) Description
show eth-cfm mep <1-8191>
domain <0-65535> association
<0-65535>
This command displays MEP
information.
Command (in SUM/CM) Description
show eth-cfm mep <1-8191>
domain <0-65535> association
<0-65535> {remote-mepid <1-
8191>|all-remote-mepids}
This command displays remote MEP
information. You can view the
information for a specific remote MEP ID
or all remote MEPs.