Alcatel-Lucent OmniAccess 5740 - Page 445

OAM Configuration on OmniAccess 5740 USG
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
419
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO VIEW ETHERNET TEST INFORMATION
EXAMPLE
ALU(config)# show eth-cfm mep 100 domain 100 association 100 eth-test-results
remote-peer-mac 00e0.b1c6.df2a
---------------------------------------------------------
MEP eth-test Results Information
---------------------------------------------------------
mepIndex : 100 mdIndex : 100
maIndex : 100 peerMacAddr : 0:e0:b1:c6:df:2a
frameCount : 1 byteCount : 64
bitErrs : 0 crcErrs : 0
AccBitErrs : 0 AccCrcErrs : 0
---------------------------------------------------------
TO VIEW ONE-WAY DELAY TEST INFORMATION
EXAMPLE
ALU(config)# show eth-cfm mep 100 domain 100 association 100 1DM-test-results
remote-peer-mac 00e0.b1c6.df2a
------------------------------------------------------------------------
1DM Test Result
------------------------------------------------------------------------
PEER MAC Delay(microseconds) Variation(microseconds)
00:e0:b1:c6:df:2a 4060307296 234660000
------------------------------------------------------------------------
Command (in SUM/CM) Description
show eth-cfm mep <1-8191>
domain <0-65535> association
<0-65535> eth-test-results
remote-peer-mac <mac-address>
This command displays the MEP, MA's,
MD's, Ethernet test results.
Command (in SUM/CM) Description
show eth-cfm mep <1-8191>
domain <0-65535> association
<0-65535> 1DM-test-results
remote-peer-mac <mac-address>
This command displays the MEP, MA's,
MD's, result of the one-way delay test.