Alcatel-Lucent OmniAccess 5740 - Page 511

CC Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
485
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO CONFIGURE RULES FOR ICMP
E
XAMPLE
The following example configures a ICMP rule with ‘any any’ and icmp-type value
10, and icmp-subtype value 5’:
ALU(config-match-list-test)# icmp any any icmp-type 10 icmp-
subtype 5
Command (in Match-list CM) Description
[<1-1024>] icmp {any|host <source
ip-address>|interface <name>|list
<name>|prefix <source ip-address/
prefix length>} {any|host
<destination ip-address>|interface
<name>|list <name>|prefix
<destination ip-address/prefix
length>} [dscp {<0-63>|<dscp-
mnemonics}|fragment|icmp-type <0-
255> [icmp-subtype <0-255>]|ip-
precedence {<0-7>|<precedence-
mnemonics>}|length {<1-1500>|
{eq|ge|gt|le|lt|range <1-1500>}}
|
tos {<0-15>|<tos-mnemonics>}]
This command is used to
configure rules for the ICMP
protocol in a match-list.