Protocol Independent Features
Left running head:
Chapter name (automatic)
528
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
E
XAMPLE 2
ALU
# show ip route static
Codes: R - RIP, O - OSPF, C - connected
S - static, M - mcstatic, B - BGP
IA - OSPF inter area route, E1 - OSPF external type 1 route,
E2 - OSPF external type 2 route, N1 - OSPF NSSA external type 1 route,
N2 - OSPF NSSA external type 2 route
* - candidate default route
6.0.0.0/24 is subnetted, 1 subnet
S 6.6.6.0 [1/0] is directly connected, Serial0/0:2
S 7.0.0.0/8 [1/0] is directly connected, Serial0/0:0
is directly connected, Serial0/0:1
S 100.0.0.0/8 [1/0] via 10.91.2.5, GigabitEthernet3/0
ALU#
EXAMPLE 3
ALU
# show ip route connected
Codes: R - RIP, O - OSPF, C - connected
S - static, M - mcstatic, B - BGP
IA - OSPF inter area route, E1 - OSPF external type 1 route,
E2 - OSPF external type 2 route, N1 - OSPF NSSA external type 1 route,
N2 - OSPF NSSA external type 2 route
* - candidate default route
5.0.0.0/24 is subnetted, 3 subnets
C 5.5.0.0 [0/0] is directly connected, Serial0/0:0
C 5.5.1.0 [0/0] is directly connected, Serial0/0:1
C 5.5.2.0 [0/0] is directly connected, Serial0/0:2
10.0.0.0/24 is subnetted, 1 subnet
C 10.91.2.0 [0/0] is directly connected, GigabitEthernet3/0
99.0.0.0/24 is subnetted, 1 subnet
C 99.99.99.0 [0/0] is directly connected, loopback1
ALU#
To Next Page
Loading...
