RIP Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
553
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO VIEW RIP PEERS
EXAMPLE
ALU#show ip rip peers
RIP Peer Table
--------------
Peer Address Interface LastUpd(sec) Rcv Ver Bad Pkts BadRoutes
1.1.1.1 GigabitEthernet3/0 865 2 0 0
10.91.2.5 GigabitEthernet3/1 25 2 0 0
ALU#
TO VIEW RIP STATISTICS
EXAMPLE
ALU# show ip rip statistics
RIP Global Statistics
---------------------
Route Changes Route Queries Rx Bad Msgs Routes Learnt Routes Held down
1 0 19 1 0
ALU#
RIP Interface Statistics
------------------------
Interface RIPv1 RIPv2
GigabitEthernet3/0 Routes learned 0 Updates sent 0 11
Bad msgs received 14 Trig Updates sent 0 2
Auth failures 0 Responses sent 0 0
*Unicast tx failure 0 Routes advertised 0 3
Bcast tx failures 0 Updates received 0 40
Mcast tx failures 0 Requests received 0 0
Bad Rtes received 0 0
GigabitEthernet3/1 Routes learned 1 Updates sent 0 8
Bad msgs received 5 Trig Updates sent 0 0
Auth failures 0 Responses sent 0 0
*Unicast tx failure 0 Routes advertised 0 1
Bcast tx failures 0 Updates received 0 3
Mcast tx failures 0 Requests received 0 0
Bad Rtes received 0 0
ALU#
Command (in SUM/CM) Description
show ip rip peers [vrf <vrf-
name>]
Displays the RIP peer table details.
Command (in SUM/CM) Description
show ip rip statistics [vrf
<vrf-name>]
Displays the RIP statistics including both
the global and interface statistics.
To Next Page
Loading...
Need help?
General
