PBR Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
649
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
EXAMPLE
ALU(config-ip-policy-pbr1)# 10 match m1 m2 not m3 interface
GigabitEthernet 3/0 next-hop 1.2.2.1
ALU(config-ip-policy-pbr1)# 20 match m1 m2 next-hop 1.2.2.2
Command (in IP Policy CM) Description
[<1-65535>] match [{all|any}]
<match-list name>...[not
<match-list name>] {for-us|
interface <interface-name>
[next-hop <ip-address>]|next-
hop <ip-address>}
This command is used to configure rules
(set priority for the rule, associate match-
lists and action) for an IP policy.
The range for the rule number is 1-
65535. This rule number signifies the
priority of a rule. By default, the
numbering pattern for rule number is the
next multiple of ten to the highest existing
rule number.
no rule <1-65535> The command deletes a rule
corresponding to the rule number.
To Next Page
Loading...
