Network Address Translation
Left running head:
Chapter name (automatic)
702
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O REORDER THE RULES IN DNAT
Note: Refer to the “Updations” section to know more on the “change” and “renumber”
keywords.
E
XAMPLE
ALU(config-nat-N2)# renumber
ALU(config-nat-N2)# change 10 20
Command (in NCM) Description
renumber Use this command to generate a
numbering scheme for the DNAT rules
configured.
change <1-65535> <1-65535> Use this command to change the
priority/order of a specific DNAT rule
configured.
To Next Page
Loading...
