Alcatel-Lucent OmniAccess 5740 - Page 854

IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
828
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O CONFIGURE SELF IDENTITY
EXAMPLE
ALU(config-ike-identity-exampleidentity)# my-id dn /CN=Bart
Simpson/O=ALU/C=US
T
O SPECIFY THE ISSUER (CA) OF THE USER’S CERTIFICATE
E
XAMPLE
ALU(config-ike-identity-exampleidentity)# my-ca CN=ALU,
OU=Certificate Authority, C=US
T
O SPECIFY THE CERTIFICATE TO BE USED
EXAMPLE
ALU(config-ike-identity-exampleidentity)# my-cert cert_Simpson
Command (in IKE Identity CM) Description
my-id {dn|fqdn|user-fqdn}
<name>)|address <ip-address>
This command configures self identity.
Command (in IKE Identity CM) Description
my-ca <name> This command specifies the issuer (CA)
of the user's certificate.
This is an optional command.
Command (in IKE Identity CM) Description
my-cert <name> This command specifies the imported
signed certificate to be used during IKE
negotiation.
This should be one among the
certificates imported under the “To
Import a Signed Certificate” command.