IPsec VPN Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
839
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO ATTACH A TRANSFORM SET TO A CRYPTO MAP
Note: If no transform set is attached to a crypto map, Default transform set is used.
E
XAMPLE
ALU(config-crypto-map-exampleMap)# transform-set netset
ALU(config-crypto-map-exampleMap)# no transform-set
T
O ATTACH PFS GROUP TO A CRYPTO MAP
EXAMPLE
ALU(config-crypto-map-exampleMap)# pfs group1
ALU(config-crypto-map-exampleMap)# no pfs
Command (in Crypto Map CM) Description
transform-set <name> This command attaches a transform-set to a
crypto map.
no transform-set The ‘no’ command detaches the specified
transform-set attached to a crypto map.
Note: A transform-set must be first
detached from the crypto map to
delete it globally.
Command (in Crypto Map CM) Description
pfs [group1|group2|group5] This command attaches a PFS group to a
crypto map.
Note: If no PFS group is attached to
a crypto map, group2 PFS is
used.
no pfs The ‘no’ command disables PFS
completely.
To Next Page
Loading...
Need help?
General
