DMVPN Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
893
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO CONFIGURE STATIC MAP ENTRY FOR NHS
E
XAMPLE
ALU(config-nhrp-alu-dmvpn)# map 192.168.1.1 1.1.1.1
ALU(config-nhrp-alu-dmvpn)# no map 192.168.1.1 1.1.1.1
Command (in Client Object CM) Description
map {<nhs-ip-address> <nbma-
address>|multicast dynamic}
This command is used to map the
static (destination) IP address to
NBMA address of the NHS.
This command can also be used in
spoke to spoke scenario, where in
the static (tunnel) IP address as well
as the NBMA address of the spoke
to be reached is known. In such a
scenario, enter the static IP address
and the NBMA address of the spoke
in the map command.
Note: Currently ‘multicast
dynamic’ parameter is
not supported.
no map {<nhs-ip-address> <nbma-
address>|multicast dynamic}
This command is used to delete the
static map entry.
To Next Page
Loading...
Need help?
General
