IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
896
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O ATTACH A NHRP OBJECT TO THE TUNNEL INTERFACE
EXAMPLE
ALU(config-if Tunnel1)# nhrp alu-dmvpn
ALU(config-if Tunnel1)# no nhrp alu-dmvpn
Command (in ICM) Description
nhrp <object-name> Enter this command in the Interface
Configuration Mode.
This command is used to attach a configured
NHRP object to the interface.
no nhrp <object-name> This command is used to detach a NHRP
object attached to the interface.
Note: You cannot delete a NHRP
object that is applied to the
interface. To delete, first detach
the a NHRP object from the
interface.
To Next Page
Loading...
Need help?
General
