Burkert FLOWave L - Page 47

47
Installation in the pipe
Type 8098 FLOWave L
→ To make sure that neither air bubbles nor gas bubbles trouble the measuring, install the device as rec-
ommended in .
α
flow direction
flow direction
flow direction
Recommended Notrecommended Notrecommended
)
 
→ 
pipe with a minimum angle against the horizontal. See .
 
Typeofprocessconnection Standardstheprocessconnectionsconformto
Angleagainstthe
horizontal
clamp
• 
• 
• 






 





clamp
• 
• 
• 
• 


• 
• 

  
→ 
 and, for the
8.3.
English