102 EDIUS — User Reference Guide
Section 1 — Getting Started
Figure 79. Restore Offline Clip - Capture Entire Clip
The Batch Capture dialog shown in Figure 80 appears.
Figure 80. Batch Capture Dialog
2. Execute the batch capture following the instructions found in Batch
Capturing on page 228.
Alternative Method:
Select “Capture all” or “Capture only the areas used in timeline” from the
Restoration Method column in the Restore Offline Clip dialog. For more
information on the Restore Offline Clip dialog, see
Relink and Restore on
page 99.
To Next Page
Loading...