EDIUS — User Reference Guide 309
Timeline Settings
equal to the length of the transition and the overall sequence length
remains unchanged. See Figure 317.
Figure 317. Transition Deleted - Extend Mode
Note When one of the clips with the transition is deleted, the transition is deleted
as well. The length of the remaining clip changes and extends to the mid-
point location of the deleted transition.
Fix Mode
Extend mode and fix mode are controlled by the “Extend clips when
applying transition/cross fade” setting in the Timeline Settings dialog.
When this setting is enabled (checked), extend mode is enabled. When the
setting is disabled (not checked), fix mode is enabled.
To change the setting, select Settings>Application Settings>Timeline from
the Preview window menu bar. Enable or disable the “Extend clips when
applying transition/cross fade” setting depending upon the mode you
desire.
• In Fix Mode, adding a transition or an audio cross fade between clips
shortens the overall length of the sequence on the Timeline (as illus-
trated in Figure 318). Deleting a transition or cross fade lengthens the
sequence on the Timeline.
Figure 318. Fix Mode Example
When adding a transition or audio cross fade, the clips before and after the
transition overlap each other by the length of the transition. The net result
is that the overall sequence length shortens by the length of the transition
as illustrated in Figure 319.
To Next Page
Loading...
Need help?
General