EDIUS — User Reference Guide 721
EDIUS SP/SP-SDI (SHX) Settings
Note The “Max size min” allows you to limit the capture bitrate. 100% means no
codec compression and the bitrate will be the same as the captured source.
Setting a lower limit - e.g. 40 - limits the capture to a bitrate that is 40% (or
whatever number is selected) of the original source. A 1440x1080 59.94i
source has a bitrate of approximately 750 Mbps. If you want the upper limit
to be 200 Mbps, for example, set the “Max size min” slider at 27 (200 is
approximately 27% of 750).
Clicking the Default button resets all settings to the defaults.
5. Click the OK button to save settings and exit the settings dialog.
Video Overlay Settings
Video playback on the EDIUS computer monitor is performed using video
overlay.
To define Video Overlay Settings for any device, do the following:
1. If necessary, click the “+” to expand the settings tree for the device.
2. Select “Video Overlay Settings” from the device settings tree. A dialog
similar to that in Figure 870 appears.
To Next Page
Loading...
Need help?
General