EDIUS — User Reference Guide 347
Timeline Clip Operations
Figure 373. Clip Menu - Unlink
• Select Clip>Unlink from the Preview window menu bar.
• Press [
ALT]+[Y] on the keyboard.
Link
Video and audio clips that have been unlinked may be relinked. In order to
link separate video and audio clips, they must meet the following criteria:
• Clips must be placed on the same track
• Clips must overlap on the track
• Clips must refer to the same source
To link separate audio and video clips, do the following:
1. Select the video and audio tracks to be linked.
2. Right-click either the audio or video clip and select “Link” from the
menu.
Note You may also select Clip>Link from the Preview window menu bar or press
[Y] on the keyboard to relink selected clips.
The clips are relinked and can be treated as a single clip.
If there is a gap between the starting points of video and audio when they
are relinked, a red square appears at the beginning of each clip indicating
the length of the gap expressed in frames. See Figure 374 for an example.
Figure 374. Linked Clips with Video/Audio Start Gap
To Next Page
Loading...