EDIUS — User Reference Guide 377
Timeline Clip Operations
Alternative Methods:
• Press [SHIFT]+[ALT]+[E] to display the Time Remap dialog.
• Right-click the Time Remap dialog and select “Add Key” to add a key
at the position of the Timeline cursor.
• Right-click the Time Remap dialog and select “Delete Key” to delete the
key at the position of the Timeline cursor.
• Press the [
Home] key to move the cursor to the first frame of the clip.
• Press the [
End] key to move the cursor to the last frame of the clip.
• Press the [I] key to move to the previous frame.
• Press the [J] key to move to next frame.
• Press the [K] key to move the focus to the Keys area.
• Press the [L] key to move the focus to the Clip area.
• Press the [
,] key to move the key/frame forward one frame.
Note This action is available only when the Timeline cursor is on a key/frame or
when the focus is in the Keys or Clips area
• Press the [.] key to move the key/frame backward one frame.
Note This action is available only when the Timeline cursor is on a key/frame or
when the focus is in the Keys or Clips area.
Video Display Layout/Crop
The display range or aspect ratio of the display may be changed.
To change the video display range, do the following:
1. Right-click the video portion of a clip on a V or VA track on the
Timeline.
2. Select “Layout” from the menu as shown in Figure 414.
Figure 414. Clip Menu - Layout
To Next Page
Loading...
Need help?
General