166 EDIUS — User Reference Guide
Section 2 — Application and Plug-In Settings
Figure 147. Overlay View Controls
Position
The blue arrow indicates the current position of the overlays. To change the
display position, click on the arrow which represents the desired position.
The circle in the center can be clicked to center the overlays vertically and
horizontally.
Size
From the size drop-down list the overlay size can be set to small, medium
or large. Default = Large.
Background
With Background checked, the shaded background area is displayed
behind the overlays. If the shaded background is not desired, de-select the
background. Default = Checked.
Export Overlays
Select which overlay information to include in Export displays. By default,
Sequence timecode is selected; Source information is not selected.
Source Information to Show
If Source Information is a selected overlay for Normal Edit, Trim or Export
operations, this setting determines what source information is displayed.
Choices are as follows:
• Timecode (default)
• Recording day
• Recording time
• Recording date
• Recording date (2 lines)
To Next Page
Loading...
Need help?
General