EDIUS — User Reference Guide 311
Timeline Settings
Track Settings
The settings listed below can be changed in the Project Settings (Detail)
dialog box. For information on accessing and changing these settings, see
Change Current Project Settings on page 55.
•TC Preset
•TC Mode
• Total Length
• Number of tracks of each track type
• Audio Channel Map
Some of the settings above, as well as additional settings, may be changed
in the Sequence Settings dialog. For more information on accessing and
changing sequence settings see Sequence Settings on page 59. The following
is a list of the settings that can be changed in the Sequence Settings dialog:
• Sequence Name
•TC Preset
•TC Mode
• Total Length
• Panning Mode
• Color Space Conversion
• Audio Channel Map
Track Panel
The items shown in Figure 322 can be set in the Track Panel:
Note The icon for each item is illuminated (white) when the setting is on. The icon
is dimmed (grey) when the setting is off.
To Next Page
Loading...