GRASS VALLEY EDIUS VERSION 5.1 User Manual

EDIUS — User Reference Guide 333
Clip Placement
Start of Clip Transition Indicator
The yellow triangle shown in Figure 354 in the lower left corner in the
mixer area indicates that a transition has been set at the beginning of the
clip.
Figure 354. Beginning of Clip Transition Indicator
Transparency Rubber Band
Click the Expand 2 button to display the Transparency adjustment area. Click
the
Mix button to display the Transparency rubber band as shown in
Figure 355. See Clips with Keyer effects applied display an aqua blue line at the
top of the mixer area. on page 526 for more information.
Figure 355. Transparency Adjustment
Setting In/Out Points and Placing a Clip
To set In/Out point on a clip and place it on the Timeline at the Timeline In
point, do the following:
1. Select the desired clip in the Asset Bin and click the Show in Player button
(highlighted in blue in Figure 356).
Note You may also drag and drop an clip from the Asset Bin to the Player

GRASS VALLEY EDIUS VERSION 5.1 Specifications

General

Brand	GRASS VALLEY
Model	EDIUS VERSION 5.1
Category	Software
Language	English