332 EDIUS — User Reference Guide
Section 5 — Timeline Operations
End of Clip Indicator
The triangular marks in the corners at the beginning and ending of the clip
(see
Figure 350) indicate the entire source clip is used on the Timeline.
These marks disappear when the clip is trimmed.
Figure 350. End of Clip Indicator
Rendering Status
The green line above the Timeline scale in Figure 351 indicates the clip has
been rendered. For other rendering status indicators, seeTimeline Scale
Markings on page 325.
Figure 351. Rendered Clip Indicator
Filter Set
The aqua blue line above the on the clip in Figure 352 indicates that a video
filter has been set for this clip.
Figure 352. Filter Set Indicator
Between-Clip Transition Indicator
When a transition has been added between clips in the Timeline, the
between clip indictor shown in
Figure 353 appears between the clips.
Note It is possible to set different transition rates for video and audio transitions.
Figure 353. Between-Clip Transition Indicator