GRASS VALLEY EDIUS VERSION 5.1 User Manual

360 EDIUS — User Reference Guide
Section 5 — Timeline Operations
Figure 392. Disabled Clip on the Timeline
Note If a clip is linked or grouped with other clips, you may choose to enable only
the selected clip or to enable only the video or audio portion of a clip with both
video and audio. To enable only a single clip or a portion of a clip, right-click
on the clip (or portion) and select “Enable only focus clip” from the menu. All
other clips or portions of the clip are disabled. Figure 393 shows an example
of only the video portion of one clip in a group enabled.
Figure 393. Video Only Enabled in a Clip Group
Deleting a Clip
To delete a clip from the Timeline, select the clip and click the Delete button
(highlighted in blue in
Figure 394) on the Timeline.
Figure 394. Timeline Delete Button
Note The result of the delete operation by any method differs depending upon the
editing mode. For more information see Sync Mode on page 305.

GRASS VALLEY EDIUS VERSION 5.1 Specifications

General

Brand	GRASS VALLEY
Model	EDIUS VERSION 5.1
Category	Software
Language	English