GRASS VALLEY EDIUS VERSION 5.1 User Manual

EDIUS — User Reference Guide 521
Adding Effects Between Clips
Figure 596. Default Effect Icon
Note If the effect view is hidden, the “D” appears on the effect name in the Effect
tree.
Changing the Length of a Transition or Cross Fade
To change the length of a transition or audio cross fade between two clips,
do the following:
1. Move the cursor to the end of the transition or audio cross fade.
The cursor changes shape as shown in Figure 597 for a clip transition or
audio cross fade and as shown in Figure 598 for a track transition.
Figure 597. Change Transition Length Cursor - Clip Transition/Audio Cross Fade
Figure 598. Change Transition Length Cursor - Track Transition

GRASS VALLEY EDIUS VERSION 5.1 Specifications

General

Brand	GRASS VALLEY
Model	EDIUS VERSION 5.1
Category	Software
Language	English