748 EDIUS — User Reference Guide
Appendix A — Hardware Settings
5. Click the OK button to save settings and close the settings dialog.
EDIUS Generic HDV Settings
Generic HDV Settings are accessed by selecting Settings>Hardware Set-
tings from the Preview window and then selecting Generic HDV Settings.
Note If the Hardware Settings tree is collapsed, click the “+” to expand the tree.
There are two settings dialogs for Generic HDV devices; “Canopus HQ
Codec Settings” and “Video Overlay Settings.”
Canopus HQ Codec Settings
See Canopus HQ Codec Settings on page 719.
Video Overlay Settings
See Video Overlay Settings on page 721.
EDIUS Generic OHCI Settings
Generic OHCI Settings are accessed by selecting Settings>Hardware Set-
tings from the Preview window and then selecting Generic OHCI Settings.
Note If the Hardware Settings tree is collapsed, click the “+” to expand the tree.
There are three settings dialogs for Generic OHCI devices; “System/
Output Settings”, “DV Device Settings” and “Video Overlay Settings.”
System/Output Settings
To define System/Output Settings for a generic OHCI device, do the fol-
lowing:
1. If necessary, click the “+” to expand the Generic OHCI Settings tree.
Select “System/Output Settings” from the Generic OHCI Settings tree. The
dialog in
Figure 886 appears.
To Next Page
Loading...
Need help?
General