62 EDIUS — User Reference Guide
Section 1 — Getting Started
To save a project with the name entered (or the default name) at project cre-
ation, do one of the following:
• Click the
Save project button (highlighted in blue in Figure 46) in the
Timeline window.
Figure 46. Timeline Save Project Button
• Click on the list button [V] of the Save project button and select “Save
Project” from the menu.
• Select File>Save Project from the preview window menu bar.
• Press the [
CTRL]+[S] keys on the keyboard.
Note As illustrated in Figure 46, the current project name which will be used for
saving the file with the methods listed above is shown in the Timeline
window.
To save a project with a name other than the current name, do one of the
following:
• Click on the list button [V] of the
Save project button and select “Save
As” from the menu.
• While holding down the [
SHIFT] key, click the Save project button (high-
lighted in blue in Figure 46) in the Timeline window.
• Select File> Save As from the preview window menu bar.
• Press the {
SHIFT]+[CTRL]+[S] keys on the keyboard.
Note Using any of the methods described above will display a Save As dialog in
which you can choose a location and file name in which to save the project.
Auto Save/Backup
Backup files are only used in unusual circumstances such as project files
becoming corrupted or EDIUS crashing while editing. They are not used in
normal operations.
Backup files are created automatically in the following manner:
To Next Page
Loading...
Need help?
General