GRASS VALLEY EDIUS VERSION 5.1 - Apply Default Effects

EDIUS — User Reference Guide 519
Adding Effects Between Clips
Figure 593. Audio Cross Fade Indicator Between Clips
Apply Default Effects
Default effects may be quickly applied to clips on the Timeline.
The defaults effects are as follows:
• Video Transitions - Dissolve
• Audio Cross Fades - Linear Out/In
• Title Mixers - Fade
Note When in the Effect View of the Effect Palette, default effects are indicated by
a blue “D” on the effect icon. See Default Effects on page 485 for more infor-
mation.
To apply a default effect, follow these steps:
1. Select a clip to which to apply a default effect.
Note The clip on either side of the desired transition point may be selected
2. Click the Set default transition button (highlighted in blue in Figure 594)
on the Timeline.
Note An alternative method is to press the [CTRL]+[P] keys on the keyboard.
Figure 594. Timeline Set Default Transition Button
The default transition(s) is added at the transition point nearest to the Time-
line cursor position.