EDIUS — User Reference Guide 707
Exporting in Various File Formats
Figure 861. Tape Export Wizard Confirmation Dialog
10. Click the Export button to begin exporting to tape.
Click the
Abort button during the export operation if you wish to cancel the
export.
Note If In and Out points are set on the Timeline, only the portion of the project
between these points is exported.
Export to Devices Not Controlled by Deck Settings
Some external playback/recording devices cannot be controlled (started,
stopped, etc) from EDIUS. Deck Settings (see
Deck Settings on page 142 for
more information) do not apply to these devices and all source control
operations must be performed manually on the device.
To export to a device not controlled by deck settings, do the following:
1. Connect the device to the EDIUS computer.
2. Set the device to external input for recording.
3. Click Play button in the Recorder.
Export begins
4. Click the Stop button in the Recorder, to stop exporting to the
external device.
To Next Page
Loading...
Need help?
General