EDIUS — User Reference Guide 269
Clip Operations
3. Continue playing the clip or position the slider on the frame at which
you wish to set the Out point.
4. Click the Set Out button in the Player controls. See Figure 262.
Alternative Method:
• Place a clip on the Timeline and set In and Out points by trimming.
• Drag the In slider or Out slider to change the position of the In or Out
point. See Figure 263.
Note When the cursor is positioned at the In point the cursor changes to “IN” as
illustrated in Figure 263. Drag the cursor position to change the In point.
When the cursor is positioned at the Out point, it changes to “OUT” and can
also be dragged to change the Out position.
Figure 263. Set In and Out Points by Trimming
Note If the Out point is placed before the In point, the position bar between the
points is displayed in red and part of the timecode is also displayed in red to
indicate an invalid In/Out condition.
Setting Separate In/Out Points for Video and Audio
In and out points may be set separately for video and audio. To set an In
point for video or audio only, do the following:
1. Click the list button (V) on the Set In button. The menu in Figure 264
appears.
To Next Page
Loading...
Need help?
General