EDIUS — User Reference Guide 732
EDIUS SD/HD (RX-E1) Settings
8. Select the two VBI lines on which VITC (vertical interval timecode) data
is present. Typically, this is lines 14 and 16 for NTSC and lines 19 and 21
for PAL video.
9. Select the desired D/Component Output settings.
10. From the “Analog Audio Monitor” drop-down list box, select the
desired channel for audio monitoring. Choices are: Ch 1/2, Ch 3/4 or
Ch 1+3/2+4.
11. Click the OK button to save the settings and close the General I/O
Settings dialog.
While in the General I/O Settings dialog, clicking the
Default* button
returns all settings marked with an “*” to their default values.
HD Balanced Audio Settings (HD Only)
1. If necessary, click the “+” to expand the RX-E1 Settings tree.
2. Select “Balanced Audio Settings” from the RX-E1 Settings tree. The
dialog in Figure 876 appears.
To Next Page
Loading...
Need help?
General